Netis P106C 4 POE+2 Uplink 100M Standard Fast Ethernet POE/ POE+ Switch with Plug and Play | IEEE 802.3at/af Compliant Powered Devices (PDs) with Auto MDI/MDIX Function | POE Budget 65W

<p><strong>Netis</strong> P106C is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 feature POE power supply capability and can be used as Power over Ethernet devices. The controlled system that complies with the IEEE 802.3af/at standard can be automatically detected and recognized by the power supply port, which can then supply power through the network cable. Two uplink ports are design for the set of 4 security camera, to upload your image or video onto server or NVR. Standard switch mode and 250M ultra-long transmission are also enabled. Using POE technology, the P106C allows it easier to deploy wireless access points (APs) and IP terminal network computers.</p> <p><strong>Features:</strong></p> <ul> <li>Supporting 802.3 Ethernet, 802.u Faster Ethernet</li> <li>Supports POE IEEE 802.3af/at compliant Powered Device (PD)</li> <li>Modes: Normal switch mode/Extended mode(Port1-4: 250Metres ultra-long transmission)</li> <li>Two uplink ports are design for the set of 4 security camera</li> <li>To upload your image or video onto server or NVR</li> <li>Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices</li> <li>Auto MDI/MDIX crossover for all ports</li> <li>Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure</li> <li>Support non-blocking wire-speed forwarding</li> <li>MAC address auto-learning &amp; auto-aging</li> <li>Steel case, the total POE power budget of 65 W</li> <li>Plug and play</li> <li>Support over-current, over-voltage, and short-circuit protection</li> <li>Support Soft Start of High Power PD</li> <li>Support sequential boot-up</li> </ul>

• ETHERNET PORT CONFIGURATION: Netis P106C fast Ethernet POE Switch provides a convenient way to extend the wired network with 6 × 10/100 Mbps adaptive RJ45 Ports supporting Auto MDI/MDIX function.
• SWITCHING FEATURES: 1.2G switching capacity supports 2K MAC address table, auto-learning and auto-aging.Store-and-forward switching scheme. Simple setup with built internal power supply.
• DOUBLE UP-LINK PORT: Two uplink ports are design for the set of 4 security camera, to upload your image or video onto server or NVR.
• HIGH POE POWER: This fast ethernet PoE/POE+ Switch is energy efficient supports PoE power up to 30W for each PoE port, 65W for all PoE ports. Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices.
• RELIABILITY: IEEE 802.3X flow control provides efficient data transfer and guarantees quiet operation with Full Duplex mode and backpressure for Half Duplex mode configuration.