Water Level Sensor, Ultrasonic Water Tank Liquid Depth Level Meter Sensor with Temperature Display Liquid Level Sensor

Specification:Description: Keep an eye on your outdoor water from the comfort of your own living room, up to 100m away. Installed at the top of your water , the transmitter unit measures the water using an ultrasonic sensor and temperature using a thermo sensor. You can the unit on a wall or pull out the stand and place it on your kitchen bench top, table or desk. View your room\'s temperature, temperature and water (represented by a 10 elements bar graph). You can store minimum/maximum records and set alarms for specific water levels (high/low) or when empty.Features: This meter monitors liquid depth , and displays on a 10-elements LCD bar graph. It can keep minimum/maximum records of liquid . Supports liquid high/low alarm and liquid empty alert. Displays indoor temperature (℉ or ℃) and temperature (℉ or ℃) at the same time. The can be put standing on desk or hanging on wall.Specification: Indoor Temperature Range: 0~50℃ Outdoor Temperature Range: -40~60℃ Temperature Accuracy: ±1oC Water Measure Rang: 0~15m Resolution: 0.01m Accurate: +/-0.03M Frequency: 433MHZ Range: 100 meters(300 feet)in open area Interval: 30s when changes or 3 minutes when does not change Battery: 2X AA 1.5V LR3 batteries (Not included) Transmitter Battery: 6X AAA 1.5V LR6 or li batteries (Not included) Battery Life: Minimum 12 months for Minimum 12 months for transmitter Size: 108*94*27mm Transmitter Size: 97*68*152mm LCD Size: 66*45mm(3.3 inch)Suitable Liquid Type: All non-corrosive liquidOpen Distance: Approx.100M/328.1ftEffective Distance : Approx.30M/98.4ftPackage Includes: 1 x Water Sensor Transmitter 1 x Indoor 2 x Screws(Batteries are NOT included)Note:Note that the product is not water proof.1. Install the battery in the battery compartment of the transmitter, do not insert the battery compartment, and insert the battery synchronously after the is set up 2. The liquid indicator has no data, press the key, and the data will be displayed.3. When reset, remove the battery Wait for a while and then turn on the power to eliminate the remaining power in the machine.4. Whether the red light of the transmitter flashes, the flashing is normal, and .5. The product is only suitable for measuring the height ≥ 1m of the , the bottom of the liquid device to the highest of the must be left between the safety distance of 0.5m, after the is turned on the first need to set the correct height of the and the safety distance according to the instructions, the incorrect settings will to measurement errors, if the value is set correctly does not show the can be pressed the key for 5 seconds to reconnect the device and the .